How To Make A Lavender Wand

To make a lavender wand, you’ll need fresh lavender stems, ribbon, and a little patience.
 
It’s a lovely old craft that turns a simple bundle of flowers into a fragrant keepsake.
 
The good news is that learning how to make a lavender wand is easier than it looks.
 
In this post, I’ll walk you through the steps so you can make your own lavender wand at home.
 
Let’s get started.
 

How to Make a Lavender Wand Step by Step

When you make a lavender wand, the most important thing is to use fresh stems that still bend easily.
 
If the stems are dry and brittle, they’ll snap instead of weaving.
 
So pick your lavender early in the morning before the heat sets in.
 
Here’s how the process works.
 

1. Gather Your Lavender and Supplies

To make a lavender wand, you’ll want an odd number of stems, usually anywhere from 7 to 15.
 
Odd numbers make the weaving pattern work out perfectly.
 
You’ll also need a length of ribbon about 3 to 4 feet long, plus scissors.
 
Grab your lavender when the buds are just starting to open but haven’t fully bloomed yet.
 
That’s the sweet spot for making a lavender wand that holds its scent for years.
 

2. Strip the Leaves and Line Up the Buds

Once you’ve gathered your stems, remove all the leaves from the lower half.
 
Then line up the flower heads so they’re all at the same height.
 
This keeps your lavender wand neat and even.
 
Hold the bundle just below the buds with one hand.
 

3. Bend the Stems Down Over the Buds

This is where the magic of how to make a lavender wand really begins.
 
Take each stem and gently bend it down over the flower heads.
 
You’re basically creating a little cage around the buds.
 
Work your way around the bundle, bending every stem.
 
Be gentle, because if you rush, the stems will crack.
 

4. Weave the Ribbon Through the Stems

Now take your ribbon and tuck the end under the bent stems near the base of the buds.
 
Start weaving the ribbon over and under each stem.
 
Go around the bundle, alternating over and under as you go.
 
Pull the ribbon snug after each pass to create that classic woven look.
 
This weaving step is the heart of making a lavender wand.
 
Keep going until the buds are fully covered.
 

5. Tie Off and Finish Your Lavender Wand

Once the buds are hidden, wrap the ribbon around the base a few times.
 
Then tie a knot and finish with a pretty bow.
 
Trim the ends of the ribbon so they look neat.
 
And just like that, you’ve made a lavender wand.
 

Tips for Making a Lavender Wand That Lasts

If you want your lavender wand to stay fragrant, a few simple tricks go a long way.
 
These tips apply whether you’re making a lavender wand for the first time or your tenth.
 

1. Use Fresh Stems Only

Fresh stems are flexible and easy to bend.
 
Dried stems crack and ruin the weave.
 
So always pick your lavender the same day you plan to make a lavender wand.
 

2. Don’t Pull Too Tight

It’s tempting to yank the ribbon tight, but that can crush the buds.
 
A firm, steady tension works best when you make a lavender wand.
 

3. Dry It Upside Down

After you make a lavender wand, hang it upside down in a cool, dark spot for a couple of weeks.
 
This helps it dry evenly and keeps its shape.
 

4. Squeeze to Refresh the Scent

Over time, the fragrance fades a bit.
 
Just give your lavender wand a gentle squeeze to release more oils.
 
That’s the beauty of making a lavender wand, it keeps giving.
 

Common Mistakes to Avoid When You Make a Lavender Wand

Even experienced crafters run into trouble, so here’s what to watch for.
 

1. Using Too Few Stems

If you use fewer than 7 stems, your lavender wand will look sparse.
 
Aim for at least 9 to 11 stems for a full, round shape.
 

2. Weaving Too Loosely

Loose weaving lets the stems slip out.
 
Keep the ribbon snug as you make a lavender wand.
 

3. Waiting Too Long to Weave

Lavender stems dry out fast.
 
If you wait a day or two, they’ll be too stiff to bend.
 
So plan to make a lavender wand the same day you cut your flowers.
 

So, How Do You Make a Lavender Wand?

To make a lavender wand, you gather fresh stems, bend them over the buds, and weave ribbon through them.
 
It’s a simple craft that anyone can learn with a bit of practice.
 
The key is using fresh lavender and keeping your ribbon tension steady.
 
Once you know how to make a lavender wand, you’ll want to make them for friends and family.
 
They’re lovely gifts that carry the scent of summer all year long.
 
So grab some lavender and give it a try, because making a lavender wand is a joyful little project worth every minute.