How To Make A Beaded Daisy Ring

To make a beaded daisy ring, you’ll need just a few basic supplies and about twenty minutes of your time.
 
This is one of those crafts that looks way more complicated than it actually is, and once you learn the simple loop-and-twist method, you can whip up a whole collection of rings in an afternoon.
 
Making a beaded daisy ring is perfect for beginners, jewelry lovers, and anyone who wants a custom accessory without spending a dime on store-bought pieces.
 
In this post, we’ll walk through exactly how to make a beaded daisy ring from start to finish, covering the best beads to use, the wire wrapping technique, and a few tips to make your daisy look extra neat.
 
Let’s jump straight into it.
 

How to Make a Beaded Daisy Ring: The Simple Method

The easiest way to make a beaded daisy ring is by using a single piece of flexible beading wire and six small seed beads for the petals plus one larger bead for the center.
 
You’ll string the petal beads in a circle, pull them tight to form the flower shape, and then twist the wire ends together to create the ring band.
 
This classic technique works wonders because it doesn’t require soldering, glue, or any fancy tools beyond a pair of pliers.
 
The key to a good beaded daisy ring is tension—you want the petals snug but not so tight that the wire kinks.
 
Before you start, gather your materials so everything is within arm’s reach.
 

1. Gather Your Supplies for Making a Beaded Daisy Ring

You’ll need six small beads for the petals—these are usually size 6/0 or 8/0 seed beads in any color you love.
 
You’ll also need one slightly larger bead for the daisy center, which could be a round pearl, a fire-polished crystal, or even a contrasting seed bead.
 
For the band, grab about 12 inches of 24-gauge or 26-gauge jewelry wire, which is flexible enough to bend easily but sturdy enough to hold its shape.
 
A pair of round-nose pliers helps with making neat loops, and a wire cutter will trim your ends cleanly.
 
If you don’t have wire, you can actually make a beaded daisy ring using stretchy elastic cord, but the wire version lasts longer and holds its shape better.
 
Once your supplies are ready, you can start assembling your beaded daisy ring.
 

2. String the Petals in a Circle

Thread one end of your wire through the first petal bead, then slide it to the center of the wire so you have equal lengths on both sides.
 
Now take the right-side wire and pass it through the second petal bead, then the left-side wire through the third petal bead.
 
Continue alternating sides until all six petal beads are on the wire, arranged in a neat little circle.
 
Once all six beads are strung, pull both wire ends gently to cinch the beads into a flower shape.
 
You’ll see the daisy start to form as the beads snuggle against each other.
 
This is the core of how to make a beaded daisy ring, so take your time and make sure the petals are evenly spaced.
 
 

3. Add the Center Bead and Twist the Wire

Now pass both wire ends through the center bead from opposite directions—this locks the daisy petals in place.
 
Pull the wire tight so the center bead sits right in the middle of the six petals, creating that classic daisy look.
 
At this point, you’ll have two wire tails extending from the bottom of the flower.
 
Twist these tails together for about half an inch to create a secure base for your ring band.
 
The twisted section acts as the bridge between the daisy head and the band that wraps around your finger.
 
Your beaded daisy ring is already starting to take shape.
 

Tips for Adjusting the Ring Size on Your Beaded Daisy Ring

Getting the ring size right is crucial when you make a beaded daisy ring, and the good news is that wire is very forgiving.
 
You can wrap the wire around your finger before twisting to check the fit, then adjust as needed.
 
Here are a few practical ways to ensure your beaded daisy ring fits perfectly every time.
 

1. Wrap to Measure Before You Commit

After twisting the base, wrap the two wire tails around the intended finger loosely.
 
Make sure the wire slides over your knuckle but sits snugly at the base of your finger.
 
Mark where the wires cross with your thumb, then untwist and trim any excess length.
 
It’s always better to go a tiny bit smaller because you can stretch the wire slightly, but you can’t easily shrink it once cut.
 
 

2. Leave a Little Extra Wire for Adjustments

When you’re learning how to make a beaded daisy ring, leave about an inch of extra wire on each tail.
 
After you twist the band around your finger, you can trim the ends and tuck them neatly under the ring.
 
This extra length saves you from starting over if your measurement is off the first time.
 
You can also curl the wire ends into tiny spirals on the sides of the daisy for a decorative touch that also prevents poking.
 

3. Use a Ring Mandrel or a Pen for Consistency

If you plan to make multiple beaded daisy rings, investing in a cheap ring mandrel is a game changer.
 
Wrap the wire around the correct mandrel size to guarantee a perfect fit every single time.
 
No mandrel? No problem—wrap the wire around a marker or pen that matches your finger size.
 
Just make sure the diameter matches, and you’ll get a uniform band.
 
This tip is especially handy when you make a beaded daisy ring as a gift.
 

Creative Variations for Your Beaded Daisy Ring

Once you’ve mastered the basic beaded daisy ring, you can start having fun with colors, sizes, and even double-flower designs.
 
The construction stays the same, but small tweaks give you endless possibilities.
 
Here are some ideas to inspire your next beaded daisy ring.
 

1. Mix and Match Petal Colors

Instead of six beads the same color, use three of one shade and three of another to create a two-tone daisy.
 
You can also alternate petals randomly for a wildflower look that’s super charming.
 
Pastel petals with a bright yellow center look classic, while neon petals with a dark center look edgy.
 
The best part is that you can make a beaded daisy ring for every outfit.
 

2. Double Daisy Ring

To make a double beaded daisy ring, create two daisies on separate wires, then twist their tails together before wrapping the band.
 
This gives you a fuller flower look that sits proudly on your finger.
 
You can also use a smaller daisy next to a larger one for a cute mother-daughter vibe.
 
Just remember that two flowers add bulk, so your band wire needs to be long enough to twist comfortably.
 
 

3. Add Extra Beads to the Band

Spice up your beaded daisy ring by threading a few accent beads onto the wire before twisting it into the band.
 
Slide a couple of small crystals or pearls down each tail after the flower is formed.
 
Then twist the wire around your finger with those beads sitting on top for extra sparkle.
 
This turns a simple beaded daisy ring into a statement piece.
 

So, How Do You Make a Beaded Daisy Ring?

To make a beaded daisy ring, you string six petal beads into a circle, add a center bead, and twist the wire ends into a finger-sized band.
 
It’s a straightforward technique that never fails to produce a cute, wearable flower ring.
 
We’ve covered all the essentials: supplies, the step-by-step process, sizing tips, and creative variations.
 
Now you have everything you need to craft your own beaded daisy ring at home.
 
Whether you’re making one for yourself or as a handmade gift, this project is quick, affordable, and endlessly fun.
 
So grab your beads and wire, and start creating your perfect beaded daisy ring today.