Your Cool Home is supported by its readers. Please assume all links are affiliate links. If you purchase something from one of our links, we make a small commission from Amazon. Thank you!
Loading a Daisy 25 BB gun is a straightforward process once you know exactly where everything is.
But if this is your first time handling it, that little lever and loading port can feel a bit confusing.
You don’t need any tools, and you definitely don’t need to be a gunsmith to get this done.
In this post, we’re going to walk through how to load a Daisy 25 BB gun step by step, cover safety tips, and answer the most common questions people have about this classic pump rifle.
So if you’ve been searching for the right way to load a Daisy 25 BB gun, you’re in the right place.
Let’s get you shooting.
Understanding the Loading Mechanism of the Daisy 25
The Daisy 25 BB gun uses a simple gravity-fed magazine tube that sits under the barrel.
This is a classic design that Daisy has used for decades because it’s reliable and incredibly easy to operate.
Before you can load a Daisy 25 BB gun, you need to know that this model is a lever-action repeater, which means you’ll be working with a spring-loaded tube and a lever to cycle each BB.
The magazine tube holds up to 25 BBs, which is where the name comes from.
To load a Daisy 25 BB gun properly, you’ll first need to make sure the gun is un-cocked and pointed in a safe direction.
Once you understand the parts, the whole process takes less than a minute.
1. Gather Your Supplies
Before you attempt to load a Daisy 25 BB gun, grab a fresh container of steel BBs, not lead pellets, because this gun is specifically designed for BBs.
You’ll also want to clear your workspace so no BBs roll away during loading.
Make sure the gun is unloaded by working the lever a few times to check the chamber.
Now you’re ready to handle the actual loading process safely.
2. Locate the Magazine Tube
To load a Daisy 25 BB gun, you’ll need to find the loading port at the end of the magazine tube.
The magazine tube is located directly beneath the barrel of the gun.
At the very front of this tube, you’ll see a small spring-loaded cap or a retaining pin depending on your specific model year.
Some Daisy 25 models have a screw-on cap, while others use a sliding pin that you press inward.
Identifying this access point is the first real step in how to load a Daisy 25 BB gun correctly.
3. Open the Loading Port
Once you’ve found the end of the magazine tube, you’ll need to open it.
On many Daisy 25 models, you simply pull the outer sleeve forward toward the muzzle to reveal the hole where BBs go in.
On other versions, you’ll compress a small spring-loaded button on the underside of the barrel to slide the outer tube forward.
Either way, when you’re learning how to load a Daisy 25 BB gun, this is the part where you want to take your time and not rush.
Once the inner tube is exposed, you’ll clearly see the open slot where BBs drop in.
4. Pour or Drop the BBs In
Now comes the fun part: actually loading the ammunition into the gun.
You can either use the included BB speed loader, or you can carefully pour BBs directly into the opening.
If you’re pouring directly, hold the gun at a slight angle so the BBs slide down gently into the tube without jamming.
Don’t try to pack them in tightly; just let them flow naturally until the tube is full.
The magazine will hold 25 BBs, and you’ll know it’s full when you see BBs sitting right at the top of the opening.
That’s the main part of how to load a Daisy 25 BB gun, but there’s one more step to get it ready to shoot.
5. Close the Loading Port
After you’ve filled the magazine tube, you need to slide the outer sleeve back into its original closed position.
Pull it back toward the stock until you hear or feel it click securely into place.
If you don’t close it fully, BBs may spill out while you’re cycling the lever.
Once the loading port is closed, you’re done with the core loading process.
Now you’re ready to chamber your first BB by working the cocking lever.
How to Load a Daisy 25 BB gun for the First Shot
Now that the tube is full, you need to get a BB into the chamber before you can fire.
When you load a Daisy 25 BB gun, the lever-action mechanism is what moves each BB into position.
Here’s how to do that part safely:
1. Point the Gun in a Safe Direction
Before you work the lever, always point the muzzle at the ground or at a safe backstop.
This is non-negotiable when you handle any airgun, including the Daisy 25.
You never want the muzzle pointing at anyone while you’re cycling the action.
2. Pull the Lever Down and Back
The lever is the metal loop behind the trigger guard.
Grip it firmly and pull it downward and away from the gun until it stops.
This action pulls back the hammer and opens the loading gate.
When you first load a Daisy 25 BB gun, you might feel some resistance, and that’s completely normal.
The spring is what pushes the BBs forward, so you’re working against that spring pressure.
3. Push the Lever Back Up
Now, push the lever back up into its original position until you hear a click.
That click means a BB has dropped into the chamber and the bolt has pushed it into place.
Your Daisy 25 is now cocked and ready to fire.
Just remember that every time you want to load a Daisy 25 BB gun for another shot, you’ll repeat this exact lever action.
Common Mistakes to Avoid When You Load a Daisy 25 BB gun
Even though the process is simple, there are a few mistakes people make when they first load a Daisy 25 BB gun.
Avoiding these will save you time and keep your gun working smoothly.
1. Overfilling the Magazine
Don’t try to force more than 25 BBs into the tube.
Overfilling can damage the spring or cause the BBs to jam at the loading port.
When you’re learning how to load a Daisy 25 BB gun, stick to the rated capacity exactly.
2. Using the Wrong Ammo
Only use standard .177 caliber steel BBs in this gun.
Don’t use lead pellets, because they won’t feed properly through the magazine tube.
If you want to load a Daisy 25 BB gun without issues, check your ammo box before you start.
3. Loading While the Gun is Cocked
Never try to open the magazine tube while the gun is cocked and ready to fire.
Always fire the gun into a safe backstop or manually de-cock it before you load a Daisy 25 BB gun.
This prevents accidental discharges that could cause injury.
4. Forgetting to Close the Port Securely
If you don’t fully close the magazine tube, BBs can spill out the front during the lever action.
It’s a common newbie mistake, but it’s easy to fix once you know to check that it’s locked in place.
So, How Do You Load a Daisy 25 BB gun?
You load a Daisy 25 BB gun by first locating the magazine tube under the barrel, opening the spring-loaded port, pouring in up to 25 BBs, and closing the port securely.
Then, you simply work the lever action once to chamber the first BB, and you’re ready to fire.
The whole process takes less than a minute once you’ve done it a few times.
Whether you’re plinking in the backyard or teaching someone new, knowing how to load a Daisy 25 BB gun is a useful skill that’s easy to master.
Just keep the gun pointed safely, use the right ammo, and follow the steps in order every single time.
Now you can confidently load your Daisy 25 and get back to having fun.
Happy shooting.